《产.品.合.格.证》Product Certification 我司生产制造的《业多活动隔断》基层板为密度纤维板、铝材、滑轮、机械等各项指标均符合国家质量监督检验检疫总局、住建部联合批准发布《室内装饰装修材料、木家具中有害物质限量标准》《室内环境污染控制标准》等室内装饰装修材料有害物质限量标准。货物中甲醇、VOC（挥发性有机化合物）、苯、甲苯和二甲苯、氨、TDI（游离甲苯二异氰酸酯）、氯乙烯单体、苯乙烯单体、可容性的铅、镉、铬、汞、砷等有毒因素均符合许可含量的限量规定。GB/T11718-1999.GB/T11718-1999.GB/18580-2001.GB/T8625-2005 GB8626-88、GB/T8627-1999、GB8624-1997、GBJ121-88标准，技术HJBZ37标准要求、选用的各种胶合材甲醛释放量应符合文件中规定的要求。甲醛释放量达到国家E1标准。铝轨道理化性能GB/T6892Cu、Fe、Si、Mg、Zn、Cr、Mn、Ti、Zr铝材氧化膜厚度大于12um, 抗拉强度≥180MPA,硬度64HV,抗弯强度≥7MPA.密封条拉伸强度≥8.15MPA,邵尔硬度65±3，撕裂强度≥30KN/M隔音岩棉密度≥62Kg/m3 阻热及降噪系数等均符合GB/T11835-1999标准。符合依据标准。消防测试等级B1级及环境隔声阻断值50dB、绿色环保均达到标准要求。生产产品相关的辅助材料（密度板材收缩或膨胀，弯曲变形适应气候条件、粘合剂、轨道等）都符合有害物质限量控制等强制执行的法制性标准。 The laminate plate of Y&D; movable partition wall is fiber board. Aluminum, pulley and machinery meet the limit value of harmful substances of Indoor Decorating and Refurbishing Materials – Limit of Harmful Substances of Wood Based Furniture and Standard for Indoor Environment Pollution Control jointly approved by AQSIQ and MOHURD. Methyl alcohol, VOC (voltaic organic compounds), benzene, methylbenzene, xylene, ammonia, TDI (toluene diisocynate), vinyl chloride monomer, styrene monomer, plumbum, cadmium, chromium, mercury, arsenic and other poisonous elements meet the allowable limit standard, such as GB/T11718-1999, GB/18580-2001, GB/T8625-2005, GB8626-88, GB/T8627-1999, GB8624-1997, GBJ121-88 and HJBZ37. Formaldehyde emission of glued laminated lumber complies with GB 18580-2008 and meets national E1 standard. The physical and chemical properties of aluminum track meet the requirements of GB/T6892. Oxide film thickness of Cu, Fe, Si, Mg, Zn, Cr, Mn, Ti, Zr and aluminum is greater than 12um; tensile strength is ≥180MPA; hardness is 64HV; bending strength is ≥7MPA; tensile strength of sealing strip is ≥8.15MPA; shore hardness is 65±3; tearing strength is ≥30KN/M; density of sound insulation rock wool is ≥62Kg/m3; thermal resistance and noise reduction coefficients meet the GB/T11835-1999 standard. Fire test at grade B1, sound insulation value at 50dB and environment protection meet the standards. Related auxiliary materials (shrinkage or expansion of MDF, bending deflection condition, adhesive and track, etc.) meet the national standard for hazardous substance limit.